Argentinean loessial soils are the main deposits of this kind of soil in South America, and cover an area of more than 600,000 km2. They are eolic soils that can preserve their original structure generated when they were deposited (primary loess) or being transported or altered in place (secondary loess or loessoid). Recent deposits are mainly primary, ML and CL-ML, whereas the older ones are similar to other unsaturated clayed and silty soils, CL and CH. Geotechnical behavior varies from collapsing soils, for primary loess, to overconsolidated by desiccation for the secondary loessoid deposits. Advances have been made in the knowledge of the cementation processes, the dielectric properties and the mechanical variations with different levels of strains, in the use of new nondestructive methods, in-situ tests and spatial variations of the most significant parameters. It has been progressed in the modeling of foundations and different infiltration processes. The engineering design is conditioned by the type of collapsibility. The criteria used in constructions try to annul the entrance of water into the ground; to eliminate the collapsibility by means of the improvement of its unstable structure or to avoid using direct foundations. In hydraulic works predominates the use of the hydro-compaction combined with methods to accelerate the collapse. Loessic soils are apt for using in embankments and fillings, because compaction destroys their macroporous structure and they behave like other types of silty soils. In order to clarify the engineering problems and its solution two history cases are explained.