Volume 49, N. 1

January-March 2026

Development of a low-cost Raspberry Pi-based electric piezocone system for cone penetration testing

Abstract

This study presents the development of a cost-effective Raspberry Pi-based electric piezocone system for Cone Penetration Testing with pore pressure measurement (CPTu). By utilizing a Raspberry Pi 4B as the data acquisition system (DAS), the proposed system offers a viable alternative to high-cost commercial geotechnical equipment, particularly in developing regions such as Bolivia. The system integrates high-precision sensors to measure tip resistance (qc), sleeve friction (fs), and pore-water pressure (u2), ensuring accurate real-time soil characterization. Field validation demonstrated a strong correlation between the Raspberry Pi-based system and a commercial CPTu, with Pearson’s r coefficients of 0.69 for sleeve friction and 0.59 for tip resistance. The root mean square error (RMSE) for tip resistance was 2.236 MPa. At the same time, for sleeve friction, it was 46.143 kPa, indicating that while the system provides reliable data, further calibration may improve accuracy. The soil classification results identified predominant layers of stiff sand and sand with silt, aligning with conventional CPTu interpretations. The affordability and adaptability of this system make it a practical solution for geotechnical investigations in resource-constrained environments, offering a functional alternative at a significantly lower cost than commercial CPTu systems. The use of open-source technology also enables real-time data monitoring, customization, and potential integration with machine learning for automated soil classification. Future research will focus on refining sensor calibration, enhancing data analytics, and expanding Internet of Things (IoT) capabilities to improve remote monitoring and streamline geotechnical testing applications.

Keywords: Cone penetration test, Geotechnical engineering, Raspberry Pi, Data acquisition system, Low-cost,


Submitted on March 28, 2025.
Final Acceptance on October 02, 2025.
Discussion open until May 31, 2026.
DOI: 10.28927/sr.2026.005425