Volume 47, N. 1

January-March 2024

Influence of industrial effluent treatment ettringite on the compressive and tensile strength and microstructure of soil-cement mixtures

Abstract

It is increasingly important to find solutions for the problem of the aluminium anodising industry which generates a large amount of acid and alkaline wastewater, composed of high amounts of phosphates, sulphates, nitrates and aluminium. The sulphate removal trough ettringite precipitation is a simple process and involves a low-cost operating. The ettringite can be also formed during the cement hydration in soil-cement mixtures which causes several damages such as expansion. However, the effect of ettringite on the compressive strength, tensile strength and microstructure have few studies. This paper presents a novel experimental study on the influence of the industrial effluent treatment ettringite in resistance and microstructure of soil-cement mixtures. Experimental tests were performed using natural soil, soil mixed with 5% and 6% of cement and soil mixed with 5% and 6% of cement and ettringite for each material. The resistance of the materials was evaluated by unconfined compressive strength and indirect tensile strength, after 3, 7 and 14 days of cure. Additionally, several characterization tests and microstructure analysis were performed. Regarding the experimental results, the compressive strength and tensile strength decreases about 75% and 85%, respectively, when ettringite was added in soil-cement mixtures. The microstructure of natural soil, soil-cement and soil-cement-ettringite mixtures shows that the addition of cement and ettringite, simultaneously, increases the ettringite crystal formation mainly because the cement functions as a source of sulfate ions contributing with the formation of more crystals. Experimental results indicate that the incorporation of ettringite in soil-cement mixtures is not suitable for geotechnical applications.

Keywords: Ettringite, Portland cement, Unconfined compressive strength, Indirect tensile strength, Microstructure,


Submitted on January 30, 2023.
Final Acceptance on January 22, 2024.
Discussion open until May 31, 2024.
DOI: 10.28927/sr.2024.001023