Volume 48, N. 2

April-June 2025

Mechanical parameters of soil-rubber mixtures from oedometer and direct shear tests

Abstract

In Brazil alone, 12.23 million tires were manufactured in the first quarter of 2024. The inadequate disposal of rubber waste from scrap tires is a globally recognized problem. The incorporation of this solid waste into geotechnical projects can serve to mitigate the environmental impact of its disposal. This paper presents complementary results previously published by Abrantes et al. (2025). This first publication dealt with the following procedures applied to the soil and soil-rubber mixtures: specimen preparation, characterization, standard compaction tests and compaction tests with damping ratio measurement, CIU Triaxial tests and Dynamic Triaxial tests. The current publication (Part 2) presents results and discussions about the following tests performed in soil and soil-rubber mixtures: oedometer tests (consolidation and elastic parameters), oedometer tests (permeability) and direct shear tests (strength parameters). The tests were conducted with pure soil and with soil-rubber mixtures in proportions of 2.5%, 5.0%, 7.5%, 10.0%, 12.5%, and 15.0% of rubber weight in relation to the weight of the pure soil. Based on present study, the rubber from shredded scrap tires can be used in applications such as: a) compacted embankments; b) soil walls reinforced with geosynthetics. Nonetheless the use of rubber mixed with soil is not recommended in clay liners for sanitary landfills.

Keywords: Soil-rubber mixtures, Oedometer tests, Direct shear tests, Geotechnical parameters,


Submitted on April 16, 2025.
Final Acceptance on April 17, 2025.
Discussion open until August 31, 2025.
DOI: 10.28927/sr.2025.006325