Volume 49, N. 3

July-September 2026

Acai fiber from Amazonian waste: advanced characterization for sustainable geotechnical reinforcement applications

Abstract

Achieving sustainable infrastructure requires the efficient valorization of regional biomass, such as açaí (Euterpe oleracea) residues. This study provides a multi-scale characterization of untreated and colloidal silica-treated açaí fibers, focusing on their application as sustainable geotechnical reinforcement. The fibers exhibit an average diameter of 0.136 mm and a naturally rough surface densely populated by silica microgranules, favoring mechanical interlocking. Chemical and lignocellulosic analyses (FTIR, XRF, and acid hydrolysis) revealed a high lignin content (45%) and moderate cellulose crystallinity (49%), indicating intrinsic robustness. However, untreated fibers showed high moisture susceptibility, with 80% absorption. The colloidal silica treatment created a stable, silicon-rich protective layer, reducing water absorption by 50% and neutralizing surface acidity, as evidenced by XRF and ash content increase to 17%. Thermogravimetric analysis by TGA/DTG demonstrated enhanced thermal stability and higher char yield for treated fibers, while tensile testing revealed a favorable balance between strength (≈250 MPa) and ductility (7.8% elongation). By bridging the gap between fiber micro-geometry and geotechnical requirements, these results demonstrate that treated açaí residue is a durable, high-value geomaterial for sustainable soil reinforcement in tropical environments.

Keywords: Acai­, fibers, Lignocellulosic biomass, Natural fibers, Fiber treatment,


Submitted on January 21, 2026.
Final Acceptance on April 22, 2026.
Discussion open until November 30, 2026.
DOI: 10.28927/sr.2026.001026