Special Issue: Mining Frontiers - Knowledge, Innovation and Sustainability (Invited Editors: A. Kormann, C.E.R. Lautenschläger), October-December, in progress, 2026
The disposal of tailings has become a challenge for the mining sector, environmental agencies, and society. This research aims to analyze the geomechanical and environmental behavior of cemented bauxite tailings (BT) for use in cemented dry tailings piles, a new trend for tailing disposal. The experimental program consisted of a series of unconfined compression tests and splitting tensile tests in BT with addition of 2%, 4%, and 6% of Portland Cement (Ci), and compacted at 18 kN/m3, 19 kN/m3, and 20 kN/m3. Leachability and solubilization tests were done with specimens with 20 kN/m3 and Ci of 0%, 4%, and 6%. All samples were done with water content of 18% and cured for 7 days. Increasing in Portland cement content and dry units of weight increases unconfined compressive strength (qu) and splitting tensile strength (qt); therefore, the increase in porosity decreases these mechanical properties. The importance of those parameters was confirmed by ANOVA and Tukey test analysis. The porosity/Portland cement content index allowed the prediction of qu and qt of BT-Portland cement blends; however, the qt/qu remained constant (0.14) and independent of this index. The environmental analysis showed that the addition of Portland cement to BT reduced the concentration of manganese in the leachate and the concentrations of chromium, iron, and sodium in the solubilized extract, complying with the toxicity and drinking water standards recommended by the USEPA. However, it also increased the concentration of aluminum in both extracts, exceeding the limit set by CONAMA 460 (Brazilian standard).