Special Issue: Mining Frontiers - Knowledge, Innovation and Sustainability (Invited Editors: A. Kormann, C.E.R. Lautenschläger), October-December, in progress, 2026
The mechanical behaviour of filtered iron ore tailings is governed by stress paths and fabric anisotropy induced during placement and compaction in “dry”-stacked facilities. Although cementation is widely used to enhance strength and stiffness, most studies remain limited to axisymmetric conditions, providing limited insight into multiaxial stress states and the role of intermediate principal stress. This study evaluates the multiaxial behaviour of cemented iron ore tailings under different stress paths, focusing on stress-path dependency and anisotropy. Initial characterization comprised unconfined compression tests on mixtures prepared with varying dry unit weights and cement contents. Selected mixtures were then tested in a true triaxial apparatus under constant mean effective stress, considering compression, plane stress, and extension loading paths. Results show that cementation increases stiffness and strength while reducing sensitivity to loading direction and stress path. Compaction-induced anisotropy observed in untreated tailings is mitigated after cement addition, particularly under compression and plane stress conditions. Cemented specimens also exhibit lower volumetric strains, indicating improved resistance to contractive behaviour. Overall, cementation promotes a more isotropic multiaxial response in iron ore tailings under stress conditions representative of “dry”-stacked facilities, highlighting the importance of incorporating stress-path effects in stability assessments.