This study evaluates the use of Class F fly ash (FA) and ground granulated blast furnace slag (GGBS), traditionally considered a waste material, as a replacement and partially reactive material in geopolymer stabilization of lean clay (CL) soil for sustainable pavement applications. The effects of NaOH concentration (4M, 8M, 12M, and 16M), GGBS content (0%, 5%, 10%, and 15%), and curing duration (7, 28, and 60 days) on mechanical and durability properties were analyzed. Results showed that the 10% GGBS blend achieved the highest UCS of 13.62 MPa at 12M NaOH after 60 days, meeting Indian Roads Congress standards. Sulphate resistance tests revealed minimal UCS loss (2.83% at 4M) for the 10% GGBS mix, compared to 34.62% for blends without GGBS. Strength transitioned from ductile failure at 7 days to brittle failure at 60 days, indicating matrix development. A strong linear correlation (R2 = 0.98) between UCS and stiffness (G) enables practical predictions. This research highlights the viability of FA-GGBS geopolymer blends as a sustainable alternative for soil stabilization in pavement applications, promoting resource utilization and waste reduction.